Product Introduction

Pipe Bend is designed for project supply. Steel pipe bend for smooth pipeline direction changes, offering stable pressure resistance, uniform wall thickness, and weld-ready bevels for industrial piping systems.

 

Key Features

• One-piece hot-formed bending creates a smooth radius with low flow resistance.

• Carbon steel base material provides high strength, stable pressure resistance, and good weldability.

• Uniform wall thickness helps withstand impact, pressure, and elevated-temperature service.

• Standard bevel ends allow reliable butt welding to seamless or welded steel pipes.

 

Technical Specifications

• Material Options: 20# carbon steel, Q235R, Q355

• ASTM A234 WPB/A420 WPL6

• EN P265GH/16Mo3

• JIS STPG370/SPV235

• GOST St20/09G2S/15X5M

• Standards: GB/T 12459, GB/T 13401, GB/T 14383

• ASME B16.9/B16.11/MSS SP-75

• EN 10253-2

• JIS B2312/B2311

• GOST 17393/GOST 33295/GOST 12876

• Angle Options: 90 degrees as standard; 45-degree and 180-degree bends can be customized

• Nominal Diameter: DN25-DN1200, with wall thickness matched to the pipeline

• Process: Hot pushing or press forming with weld-prepared bevels

 

Applications

• Heating, steam, and hot-water pipeline direction changes Oil, gas, and general chemical medium transport lines Municipal, plant, and construction-site water-supply and drainage mains Dust-removal, smoke-exhaust, and industrial ventilation ducting.

 

Ordering & Quality Documentation

For quotation, specify the fitting type, steel grade, nominal size, wall thickness or schedule, end preparation or connection, applicable dimensional standard, quantity and destination. Confirm compatibility with the adjoining pipework and project specification.

 

For project procurement, specify any required material test certificate (MTC), inspection report, certificate of origin or other shipment documentation in your inquiry. Document type, availability and applicability must be confirmed for the exact material grade, shipment and order; no blanket certification is implied.

 

Product FAQ

Q: How should I specify a compatible fitting?

A: Provide the nominal size, material grade, wall thickness or schedule, connection and applicable fitting standard.

 

Q: How are fitting documents confirmed?

A: State the required material and inspection documentation when requesting a quotation; confirm availability before ordering.

 

Request a Quote

Send MGTSP the required product specification, quantity and destination for a quotation. Any listed grades, processing options, inspection documents and delivery terms remain subject to order confirmation.