Khoom Taw Qhia

Stainless hlau tiaj tiaj bar nrog qhov ntev, zoo toughness, thiab corrosion kuj, haum rau fabrication, thav duab, kev txhawb nqa, thiab cov qauv zoo nkauj.

 

Ntsiab nta

• Kub-dov los yog txias-kos ib daim ntawv muab ib qho chaw tiaj tus thiab yog qhov ntev.

• High toughness thiab lub zog ua rau nws yooj yim rau txiav, khoov, weld, thiab fabricate.

• Cov khoom siv stainless hlau tiv thaiv xeb, acid, alkali, thiab seawater corrosion.

• Qhov ntev tsis tu ncua ua rau stacking, cia, thiab kev tsim kho ntawm qhov chaw yooj yim.

 

Technical Specifications

• Khoom siv: Tuam Tshoj 304/316/316L

• EU 1.4301/1.4307/1.4401/1.4404/1.4372

• USA: S30400/S30403/S31600/S31603

• Nyiv SUS304/304L/316/316L

• Russia 08X18H10/03X18H11/08X17H13M2/0317H14M3

• Txheem: Tuam Tshoj GB / T 704, GB / T 4226

• EU EN 10088, EN 10029

• Teb chaws As Mes Lis Kas ASTM A276, A480

• Nyiv JIS G4303, G4304

• Russia GOST 2590/18143

• Thickness: 3-30 hli; dav: 20-150 mm

• Common Ntev: 6 m ib thooj; kev pabcuam txiav-rau-ntev yog muaj

• Nto: kub dov dawb tiav, polished tiav, los yog txhuam tiav

 

Daim ntawv thov

• Cov txheej txheem steel xws li kev txhawb nqa, guardrails, cov khoom siv hauv paus, thiab cov kabmob thauj khoom.

• Pipeline accessories xws li corrosion-resistant yeeb nkab brackets thiab valve txhawb.

• Kho kom zoo nkauj tej yaam num xws li curtain-wall keels, stair edging, thiab hniav trim.

• Cov khoom siv tshuaj lom neeg thiab dej kho, tso tsheb hlau luam, thiab cov khoom siv tiv thaiv corrosion-resistant.

 

Ordering & Cov ntaub ntawv zoo

Rau kev hais lus, muab ntu hom thiab kev xaiv, qib steel, qhov ntev nominal, qhov ntev, cov qauv siv tau, kev kho deg lossis kev ua haujlwm, kom muaj nuj nqis thiab qhov chaw xa khoom.

 

Rau qhov kev yuav khoom, qhia cov ntaub ntawv pov thawj uas yuav tsum tau ua (MTC), daim ntawv tshuaj ntsuam xyuas, daim ntawv pov thawj ntawm keeb kwm lossis lwm cov ntaub ntawv xa tuaj hauv koj qhov kev nug. Cov ntaub ntawv hom, muaj thiab siv tau yuav tsum tau lees paub rau cov khoom siv tiag tiag, kev xa khoom thiab kev txiav txim; tsis muaj daim ntawv pov thawj yog implied.

 

Khoom FAQ

Q: Cov ntsiab lus twg xav tau rau kev yuav khoom seem?

A: Muab cov qauv tsim, qib, qhov ntev, qhov ntev, qauv, tiav thiab ntau.

 

Q: Dab tsi yuav tsum tau kuaj xyuas rau cov qauv siv?

A: Paub meej txog ntu thiab cov khoom siv tshwj xeeb tiv thaiv qhov project tsim thiab thov cov ntaub ntawv tshuaj xyuas.

 

Thov ib daim Quote

Xa MGTSP cov khoom yuav tsum tau specification, kom muaj nuj nqis thiab lo lus uas peb rau ib tug hais. Txhua qib uas tau teev tseg, kev xaiv ua, cov ntaub ntawv tshuaj xyuas thiab cov nqe lus xa khoom yuav raug lees paub rau kev txiav txim.