Gabatarwar Samfur

Bakin karfe welded bututu tare da santsi welds, goge saman, da lalata juriya ga ruwa kai, kayan aiki bututu, da kuma masana'antu bututu tsarin.

 

Mabuɗin Siffofin

• Kafa ta walda birgima farantin, tare da lebur weld kabu da m ciki da waje goge saman.

• 304/316 bakin karfe yana tsayayya da acid, alkali, da lalata ruwan teku ba tare da tsatsa ba.

• Daidaitaccen zagaye da kaurin bango iri ɗaya yana rage juriyar isar da ruwa.

• Ana iya yanke bututun, lanƙwasa, da kuma haɗa shi da flanges don dacewa da kayan aikin bututu daban-daban.

 

Ƙididdiga na Fasaha

• Abu: China 304/316/316L

• EU 1.4301/1.4307/1.4401/1.4404/1.4372

• Amurka UNS S30400/S30403/S31600/S31603

• Japan SUS304/304L/316/316L

• Rasha 08X18H10/03X18H11/08X17H13M2/0317H14M3

• Ma'auni: China GB/T 12771, GB/T 19228, JG/T 539, GB/T 3280

• EN 10217, EN 10296, EN 10312, EN 10357

• USA ASTM A312/A358/A554/A554M/A269/A269M/A270/A270M

• Japan JIS G3459/G3448/G3447/G3463

• Rasha GOST 11068/R 71800

• Diamita na waje: 50-600 mm, galibi manyan bututu masu tsayi

• Kaurin bango: 2-12 mm; Tsawon tsayayyen gama gari shine 6 m kowace bututu

• Surface: gamawar asali na masana'antu ko gogewar ciki da waje

 

Aikace-aikace

• Chemical ruwa bututu don acid, alkali, da kuma gurbataccen ruwa canja wuri.

• Ayyukan kula da ruwa kamar najasa, zubar ruwan teku, da bututun shukar tsarkakewa.

• Tsarin iska da hayaki mai fitar da hayaki kamar magudanan sharar masana'anta da bututun cire ƙurar muhalli.

• Abubuwan more rayuwa na birni kamar samar da ruwa na bakin teku da magudanar ruwa da manyan bututun jigilar kayan aiki.

 

Yin oda & Takardun inganci

Da fatan za a samar da ƙimar ƙarfe da ake buƙata, diamita na waje ko girman sashe, kauri na bango, tsayi, daidaitaccen ma'auni, ƙarewar saman ko shafi, adadin tsari da wurin isarwa. Idan an yi nufin bututu don takamaiman tsarin, haɗa da ƙira da buƙatun dubawa.

 

Don siyan aikin, ƙididdige duk wata takaddar gwajin kayan da ake buƙata (MTC), rahoton dubawa, takardar shaidar asali ko wasu takaddun jigilar kaya a cikin bincikenku. Dole ne a tabbatar da nau'in daftarin aiki, samuwa da aiki don ainihin ƙimar kayan aiki, jigilar kaya da oda; babu takardar shaidar bargo da aka nufa.

 

FAQ samfur

Tambaya: Wadanne girma ya kamata a haɗa a cikin bincike?

A: Haɗa ma'auni na waje, kauri na bango, tsayi, ƙimar ƙarfe, daidaitattun da ake buƙata da adadin tsari.

 

Tambaya: Za a iya buƙatar takaddun bincike?

A: Ƙayyade binciken da ake buƙata ko takaddun kayan aiki a cikin binciken; Dole ne a tabbatar da samuwa don samfurin da aka zaɓa da tsari na wadata.

 

Nemi Magana

Aika MGTSP ƙayyadaddun samfur da ake buƙata, yawa da kuma makoma don zance. Duk wani maki da aka jera, zaɓuɓɓukan sarrafawa, takaddun dubawa da sharuɗɗan bayarwa sun kasance ƙarƙashin tabbatar da oda.