Gabatarwar Samfur

Karfe Karfe bututu tare da Ciki da na waje Anti-lalata Shafi an tsara shi don samar da aikin. Bututun karfe mai rufaffiyar ciki da waje don jigilar ruwa mai girman diamita, ayyukan ruwa, layukan mai da iskar gas, da kaskon tushe.

 

Mabuɗin Siffofin

Karkade submerged-baka welded forming haifar da zagaye m sashe tare da uniform matsa lamba rarraba.

Za a iya yin amfani da ruwa mai ci gaba da walda kuma a duba shi don ingantaccen aikin rufewa.

• Yaduddukan hana lalata na ciki da na waje suna tsayayya da acid, alkalis, ruwan ƙasa, da yanayin sabis na binne.

• Diamita, kauri na bango, tsayi, bevels, da tsarin sutura ana iya tsara su don buƙatun aikin.

 

Ƙididdiga na Fasaha

• Abu: Q235B/Q235C/Q355B/Q355C/Q355ND

• ASTM A36/A572 Gr50

EN S235/S355 jerin

• JIS SS400/SM490

• Rasha St da 09G2S maki; bakin karfe akwai

• Nau'in bututu: Karfe welded bututu

• Girman Girma: DN200-DN3000, kaurin bango 6-16 mm

• Tsawon: Na kowa 12 m; yankan, flanging, da anti-lalata akwai samuwa

• Shafi: TPEP na ciki / waje shafi, 3PE, epoxy coal-tar shafi, ko IPN8710 ruwan sha ruwa

 

Aikace-aikace

• Matsalolin ruwa na birni, bututun najasa, magudanar ruwan sama, da tsarin zubar da ruwa Tafsirin ruwa, ayyukan kogi, ban ruwa, da manyan diamita ayyukan canja wurin ruwa ƙarancin iskar gas, ɗanyen mai, da ruwan sharar ruwa matsakaicin layin gada, ƙarfin iska, da ginin tushe manyan layukan ƙarfe na ƙarfe.

 

Yin oda & Takardun inganci

Da fatan za a samar da ƙimar ƙarfe da ake buƙata, diamita na waje ko girman sashe, kauri na bango, tsayi, daidaitaccen ma'auni, ƙarewar saman ko shafi, adadin tsari da wurin isarwa. Idan an yi nufin bututu don takamaiman tsarin, haɗa da ƙira da buƙatun dubawa.

 

Don siyan aikin, ƙididdige duk wata takaddar gwajin kayan da ake buƙata (MTC), rahoton dubawa, takardar shaidar asali ko wasu takaddun jigilar kaya a cikin bincikenku. Dole ne a tabbatar da nau'in daftarin aiki, samuwa da aiki don ainihin ƙimar kayan aiki, jigilar kaya da oda; babu takardar shaidar bargo da aka nufa.

 

FAQ samfur

Tambaya: Wadanne girma ya kamata a haɗa a cikin bincike?

A: Haɗa ma'auni na waje, kauri na bango, tsayi, ƙimar ƙarfe, daidaitattun da ake buƙata da adadin tsari.

 

Tambaya: Za a iya buƙatar takaddun bincike?

A: Ƙayyade binciken da ake buƙata ko takaddun kayan aiki a cikin binciken; Dole ne a tabbatar da samuwa don samfurin da aka zaɓa da tsari na wadata.

 

Nemi Magana

Aika MGTSP ƙayyadaddun samfur da ake buƙata, yawa da kuma makoma don zance. Duk wani maki da aka jera, zaɓuɓɓukan sarrafawa, takaddun dubawa da sharuɗɗan bayarwa sun kasance ƙarƙashin tabbatar da oda.