Gabatarwar Samfur

An ƙera bututun ƙarfe na musamman na Conical don samar da aikin. Bututun ƙarfe mai nau'i na musamman na musamman wanda aka yi ta hanyar mirgina farantin karfe da walda, wanda ya dace da masu ragewa, bawo na kayan aiki, rigunan hannu, da abubuwan da ba daidai ba na tsari.

 

Mabuɗin Siffofin

• Birgima da welded farantin yi gini siffofi concentric tapered ko al'ada miƙa mulki sassa zuwa zane bukatun.

• Multiple kayan da uniform kauri kauri samar da barga matsa lamba yi da kuma m weld quality.

• Diamita, taper, tsayi, bevels, da jiyya na sama ana iya keɓance su don buƙatun aikin.

• Babban diamita mara daidaitaccen tsari ya dace da sassan miƙa mulki, harsashi na kayan aiki, da aikin tsari na musamman.

 

Ƙididdiga na Fasaha

• Abu: Q235B/Q235C/Q355B/Q355C/Q355ND

• ASTM A36/A572 Gr50

EN S235/S355 jerin

• JIS SS400/SM490

• Rasha St da 09G2S maki; bakin karfe tepered cylinders samuwa

• Ma'auni na al'ada: Ƙananan-ƙarshen diamita, babban diamita mai girma, taper, da tsayi za a iya samar da su don zane

• Kauri bango: 6-60 mm, tare da na ciki / waje beveling, NDT, da lalata kariya samuwa

• Tsari: mirgina farantin, walda, gwaji mara lalacewa, fashewar yashi, fenti baki, ko murfin kwal-tar epoxy

 

Aikace-aikace

• Chemical kayan aikin hasumiya reducers, tanki mashiga / kanti mika mulki, da conical bawo Bridge, iska-ikon, da kuma tushe tapered karfe hannun riga Manyan diamita bututun rage ducts, kura-cure ducts, da samun iska miƙa mulki cylinders Kayan aiki goyon bayan ginshikan da hopper fitarwa Cones.

 

Yin oda & Takardun inganci

Da fatan za a samar da ƙimar ƙarfe da ake buƙata, diamita na waje ko girman sashe, kauri na bango, tsayi, daidaitaccen ma'auni, ƙarewar saman ko shafi, adadin tsari da wurin isarwa. Idan an yi nufin bututu don takamaiman tsarin, haɗa da ƙira da buƙatun dubawa.

 

Don siyan aikin, ƙididdige duk wata takaddar gwajin kayan da ake buƙata (MTC), rahoton dubawa, takardar shaidar asali ko wasu takaddun jigilar kaya a cikin bincikenku. Dole ne a tabbatar da nau'in daftarin aiki, samuwa da aiki don ainihin ƙimar kayan aiki, jigilar kaya da oda; babu takardar shaidar bargo da aka nufa.

 

FAQ samfur

Tambaya: Wadanne girma ya kamata a haɗa a cikin bincike?

A: Haɗa ma'auni na waje, kauri na bango, tsayi, ƙimar ƙarfe, daidaitattun da ake buƙata da adadin tsari.

 

Tambaya: Za a iya buƙatar takaddun bincike?

A: Ƙayyade binciken da ake buƙata ko takaddun kayan aiki a cikin binciken; Dole ne a tabbatar da samuwa don samfurin da aka zaɓa da tsari na wadata.

 

Nemi Magana

Aika MGTSP ƙayyadaddun samfur da ake buƙata, yawa da kuma makoma don zance. Duk wani maki da aka jera, zaɓuɓɓukan sarrafawa, takaddun dubawa da sharuɗɗan bayarwa sun kasance ƙarƙashin tabbatar da oda.