Gabatarwar Samfur

Karfe na tashar tare da sashin U-dimbin birgima mai zafi, ƙarfin lanƙwasawa mai ƙarfi, da goyan bayan gefen barga don dandamali, firam ɗin, goyan baya, shelves, da tsarin birni.

 

Mabuɗin Siffofin

• Sashin mai siffa mai zafi mai zafi yana ba da ƙarfin lanƙwasawa mai ƙarfi da goyan bayan gefe.

• Q235B da Q355B ƙananan ƙananan ƙarfe suna ba da kyakkyawan ƙarfi da aikin ƙirƙira.

• Daidaitaccen girman gidan yanar gizo da flange suna tari da kyau kuma suna haɗuwa cikin sauƙi tare da I-beams da ƙarfe na kusurwa.

• Cire tsatsa, zanen, da galvanizing mai zafi-tsotsa suna samuwa don tsarin gida ko waje.

 

Ƙididdiga na Fasaha

• Abu: Q235B/Q235C/Q355B/Q355C/Q355ND

• ASTM A36/A572 Gr50

EN S235/S355 jerin

• JIS SS400/SM490

• Rasha St da 09G2S maki

• Ma'auni: GB/T 706, GB/T 700, GB/T 1591

• ASTM A36/A572/A240/A480

EN 10058/EN 10025

• JIS G3192

• GOST 8509/GOST 8510/GOST 19281/GOST 380

• Girman Girma: Cikakkun samfuran tashoshi-karfe; masu girma dabam dabam za a iya musamman

• Tsawon: Na kowa 6 m, 9 m, da 12 m; yankan da sarrafa ramuka akwai

• Surface: Ƙarshen oxide mai zafi mai zafi; zafi-tsoma galvanizing akwai

 

Aikace-aikace

• Gine-ginen masana'anta, kayan kwalliyar rufin, ginshiƙan kayan aiki, ginshiƙan dandamali, da ginshiƙi suna goyan bayan ƙirar bangon labule, tsarin matakan hawa, gada kayan haɓaka kayan ɗamara na gada Warehouse tara katako, firam ɗin injin, da firam ɗin tallafin bututu kwarangwal na gadi na birni, goyan bayan bututu-gallery, da sassan ƙarfafawa.

 

Yin oda & Takardun inganci

Don ambato, samar da nau'in sashe da nadi, ƙimar ƙarfe, girman ƙima, tsayi, ma'auni mai dacewa, jiyya na ƙasa ko buƙatun sarrafawa, yawa da wurin isarwa.

 

Don siyan aikin, ƙididdige duk wata takaddar gwajin kayan da ake buƙata (MTC), rahoton dubawa, takardar shaidar asali ko wasu takaddun jigilar kaya a cikin bincikenku. Dole ne a tabbatar da nau'in daftarin aiki, samuwa da aiki don ainihin ƙimar kayan aiki, jigilar kaya da oda; babu takardar shaidar bargo da aka nufa.

 

FAQ samfur

Tambaya: Wadanne cikakkun bayanai ake buƙata don siyan sashe?

A: Samar da sashe nadi, daraja, girma, tsawo, misali, gamawa da yawa.

 

Tambaya: Menene ya kamata a bincika don aikace-aikacen tsarin?

A: Tabbatar da sashe da ƙayyadaddun kayan aiki akan ƙirar aikin da takaddun binciken da aka nema.

 

Nemi Magana

Aika MGTSP ƙayyadaddun samfur da ake buƙata, yawa da kuma makoma don zance. Duk wani maki da aka jera, zaɓuɓɓukan sarrafawa, takaddun dubawa da sharuɗɗan bayarwa sun kasance ƙarƙashin tabbatar da oda.