Gabatarwar Samfur

Babban Diamita Kaurin bangon Bututun Karfe maras sumul an tsara shi don samar da aikin. Babban diamita mai kauri-bangon bututun ƙarfe mara nauyi mara nauyi mara nauyi, juriya mai ƙarfi, da ƙarfin aiki don makamashi, sinadarai, injina, da ayyukan tushe.

 

Mabuɗin Siffofin

• Hot-birgima sumul forming gusar weld seams da bayar da m matsa lamba da tasiri juriya.

• Babban kauri mai kauri bango yana ba da babban lanƙwasa da ƙarfin matsawa tare da ƙarancin nakasu.

• Santsi na ciki da na waje ganuwar suna goyan bayan beveling, flanging, NDT, da kuma sarrafa lalata.

• Jikin bututu mai yawa da juriya mai zafin jiki sun dace da sabis na bututun masana'antu da makamashi.

 

Ƙididdiga na Fasaha

• Abu: Q235B/Q235C/Q355B/Q355C/Q355ND

• ASTM A36/A572 Gr50

EN S235/S355 jerin

• JIS SS400/SM490

• Rasha St da 09G2S maki; bakin karfe akwai

• Diamita na waje: 33.7-2400 mm; babban diamita da nauyi bango kauri za a iya musamman

• Tsawon: Na kowa 6-12 m; yankan, maganin zafi, da gwajin da ba ya lalacewa

• Surface: Ƙarshen oxide mai zafi mai zafi; sandblasting, zanen, da ciki/na waje shafi akwai

 

Aikace-aikace

• Turi mai zafi, mai da iskar gas, sinadarai, da bututun ruwa mai matsa lamba Wutar wutar lantarki babban layin tururi da bututun dumama gunduma bututun tururi mai zafi, manyan hannayen riga na kayan aiki, da kayan aikin matsa lamba Manyan gada, wutar lantarki, da ginin tushe karfe casings.

 

Yin oda & Takardun inganci

Da fatan za a samar da ƙimar ƙarfe da ake buƙata, diamita na waje ko girman sashe, kauri na bango, tsayi, daidaitaccen ma'auni, ƙarewar saman ko shafi, adadin tsari da wurin isarwa. Idan an yi nufin bututu don takamaiman tsarin, haɗa da ƙira da buƙatun dubawa.

 

Don siyan aikin, ƙididdige duk wata takaddar gwajin kayan da ake buƙata (MTC), rahoton dubawa, takardar shaidar asali ko wasu takaddun jigilar kaya a cikin bincikenku. Dole ne a tabbatar da nau'in daftarin aiki, samuwa da aiki don ainihin ƙimar kayan aiki, jigilar kaya da oda; babu takardar shaidar bargo da aka nufa.

 

FAQ samfur

Tambaya: Wadanne girma ya kamata a haɗa a cikin bincike?

A: Haɗa ma'auni na waje, kauri na bango, tsayi, ƙimar ƙarfe, daidaitattun da ake buƙata da adadin tsari.

 

Tambaya: Za a iya buƙatar takaddun bincike?

A: Ƙayyade binciken da ake buƙata ko takaddun kayan aiki a cikin binciken; Dole ne a tabbatar da samuwa don samfurin da aka zaɓa da tsari na wadata.

 

Nemi Magana

Aika MGTSP ƙayyadaddun samfur da ake buƙata, yawa da kuma makoma don zance. Duk wani maki da aka jera, zaɓuɓɓukan sarrafawa, takaddun dubawa da sharuɗɗan bayarwa sun kasance ƙarƙashin tabbatar da oda.